loading
BOWAY
| Availability: | |
|---|---|
| Quantity: | |
The feeder is made of imported rubber and equipped with a three-axis oil structure. This structure ensures a uniform and stable oil flow process and effectively avoids wrinkles in the material. At the same time, the design also has the advantages of clean and fuel-saving, which can extend the service life of the rubber shaft and reduce the maintenance cost of the equipment.
This stacker is highly versatile and suitable for a variety of different aluminum foil containers. No matter what shape and size of the mould, it can be perfectly matched on the stacker. In addition, it is also equipped with the detection function of mold jamming and discharge, this function can monitor the working status of the mould in real time, once an abnormal situation is found, such as mould jamming or poor discharge, the system will immediately send out an alarm and take corresponding measures, so that the mould and equipment can be better and more effectively protected, prolong the service life of the mould and equipment, and reduce maintenance costs and production risks.
The volume of waste materials compressed into blocks is greatly reduced, saving a lot of stacking space. This is of great significance for production sites where space is limited. At the same time, the compressed waste block is convenient for transportation and storage, which can effectively reduce the transportation cost and management difficulty.
Diversified rim design: In order to meet the diversified needs of customers, we are committed to designing and manufacturing moulds for a variety of rims,These different types of rim moulds can meet the production needs of aluminum foil lunch boxes of various specifications and shapes, making our products have a wider range of application fields and market adaptability.
Yangli high accuracy pressure machine
Feeding machine
Foil container stacker
PLC controller-Simens
Scrap collecting device
| Punch Form | C-shaped octagonal guide rail |
| Long stroke | 250mm can also be customized |
| Slider adjustment | 80mm equipped with electric adjustment mode |
| Size of working desk | 1700*1000mm |
| Mounting height | 450-500 |
| Spray wind | 3 groups |
| Beaten | 3 groups |
| Air reservoir | 6 groups |
| Mould lifter | Automatic with elastic protection |
| Uncoiling motor | 2.2kw |
| Oil passing method | Immersion |
| Feeding accuracy | +/- 0.2mm |
| Width of jumbo roll | 100-1200mm |
| Inner diameter of jumbo roll | 76mm |
| Outer diameter of jumbo roll | 1000mm |
| Power supply | 380V 50HZ 3PH+N+E (customized) |
| Power | 15KW |
| Receiving belt height | 900 +/-80mm Height can be adjust |
| Minimum size of foil container | 100*150mm |
| Max size of foil tray | 350*350 two channels 220*350 four channels |
| Number of channels | can be customized 2/3/4/5 |
| Max stacking height | 450mm |
Aluminum foil lunch boxes have been widely used in the aviation field. Due to the special environmental conditions when the aircraft is flying at high altitude, the requirements for food packaging are also more stringent. Aluminum foil lunch boxes are lightweight, which helps to reduce the load of the aircraft and reduce fuel consumption. At the same time, its good sealing ability can ensure that the food is not affected by external factors during storage and transportation, and maintain the quality and safety of the food. In addition, the foil tray is easy to carry and distribute, improving the efficiency of in-flight catering services, providing passengers with delicious and safe food for a comfortable dining experience during the journey.
